SILICON ULTRA ATA 133 IDE RAID PCI CONTROLLER HOST CARD

Silicon Image Ultra ATA/133 IDE RAID PCI CONTROLLER CARD

Add High Performance and Reliable Ultra ATA-133 2 Channels / 4 Devices connection and RAID 0, RAID 1, RAID 0+1 on your PC system to support all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE ,IDE storage devices and HDD larger than 137GB.

This PCI Host Adapter can upgrade your desktop computer to have high performance Ultra ATA-133 RAID dual Channels for 4 connections of ATA/ATAPI devices. It can support Low profile PCI and regular size PCI both. The card provides 32bit, 33/66 MHz PCI interface and fully compliant Ultra ATA-133 channels that can access all Ultra ATA (include ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE) storage devices such as HDD, CD-ROM, CD-RW and DVD-ROM. RAID 0 (Striping), RAID 1 (Mirroring) and RAID 0+1 (mirrored-stripping) improve the data performance and provide the data redundancy.

• Can Support HDD larger than 137GB!
• Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card  
• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
• Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing
• data to 2 drives
• Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
• RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the
• performance enhancements that come from Striping and the data availability and integrity that comes from
• Mirroring
• Supports two independent Ultra ATA-133 channels
• Supports full speed burst transfers on the ATA bus
• Supports software-controlled ATA bus tri-state
• Supports device specific timing registers
• Supports device read-ahead and write-ahead capability under Virtual DMA
• Features one 256-byte FIFO (32-bit x 64 deep) per IDE channel for host reads and writes
• Features ATA to PCI interrupt masking
• Features command buffering from the PCI to ATA
• Features Virtual DMA: Bus master transfer on the PCI bus and PIO transfer on the ATA bus
• Features Watch Dog Timer for fault resiliency
• Compliant with PCI Specification, revision 2.2
• Integrated PCI DMA engines
• 32 bit, 33/66MHz fully compliant PCI host interface
• Completely with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000 and XP

• Model: SD-SIL680-RAID
• Interface: PCI
• Silicon Image SIL680 chipset
• UDMA6 ATA/133 compliant
• ATA/ATAPI-6 compliant
• Supports maximum data rate of 133MB/sec
• Two Ultra ATA channels with 256 Bytes buffer per channel
• Connect up to four IDE/ATA devices
• Automatic performance tuning for each device attached
• Supports Ultra and Multi-Word DMA timing modes
• Fully backwards compatible with Ultra ATA/100, ATA/66, Ultra ATA/33, EIDE/Fast ATA-2, IDE, and ATAPI Devices
• Supports RAID function 0, 1 and 0+1

• Windows 98/98SE/Me/NT 4.0/2000/XP

• Controller Card
• Driver on CD